How do you measure an Australian Saddle Seat?

How do I know my saddle seat size?

Measuring your Saddle Seat Size

  1. Sit in a chair with your feet flat on the ground so that your knees are bent at a 45-degree angle. Be sure your buttocks are touching the back of the chair.
  2. Take a measuring tape and run it along your thigh bone, measuring from the end of your knee to the backside of your buttocks.

15 сент. 2017 г.

How do you measure an Australian saddle gullet?

Measure the gullet by stretching a measuring tape from concho to concho across the front of the saddle, not over the top. Saddles with semi-quarter horse bars usually have gullets of 6 1/2 inches to 6 3/4 inches, while those with full quarter horse bars will feature gullets of 7 inches.

How big is a 17 inch saddle?

A leg/seat measurement of 20-21.5 inches equals a 17-inch saddle. A leg/seat measurement of 21.5-23 inches equals a 17.5-inch saddle.

How do you fit an Australian saddle?

The wider the saddletree, the lower the front of the saddle will sit. Ideal Fit – The front and back of this saddle is level, distributing the rider’s weight evenly over the horse’s back. Don’t just consider the front and back of the saddle, also look at the seat itself. The seat in this saddle is nice and level.

IT IS INTERESTING:  Has it ever snowed on Christmas Day in Australia?

What width saddle do I need?

Scientists have measured sit bone spacing for large populations. On average, men’s sit bone width ranges between 100mm – 140mm (give or take a few mm to round), and women’s range between 110mm – 150mm. Graphing these two averages shows an overlap of 30mm between men and women’s average sit bone spacing.

How do you know what size English saddle you need?

A good rule of thumb is that an English saddle seat size will run around two inches larger than a Western saddle. So, if you ride a 15.5” Western saddle, you will likely need a 17.5” English saddle.

Are Australian saddles comfortable?

The stirrup position on the Australian saddle is a little more forward than in a western saddle and the seat positions the legs in front of the body. This makes the saddle comfortable for long hours of riding and for riding in tough terrain.

How do you know if your saddle fits correctly?

Place the saddle on the horse’s bare back without a pad. There should be two to three fingers space between the top of the wither and the gullet of the saddle. If you can vertically fit your whole hand between the bottom of the gullet and the wither, the tree is probably too narrow.

What size Australian girth do I need?

Sample Girth Sizing Chart

Horse Height Western Aussie
14H to 15H (Small Horse) 30-32 33-35
15H TO 16H (Medium Horse) 32-34 36-38
16H to 17H (Large Horse) 36 39-40
17H and Over

What size saddle do I need cycling?

Many suggest adding about 20mm, as signified by the Road Bike Bros above, which would then land you on the ideal saddle. For example, if your sit bones measured 130mm, you add 20mm and voila, a 150mm saddle width will fit perfectly!

IT IS INTERESTING:  What is the biggest super fund in Australia?

Can a saddle be too short for a horse?

A saddle can’t really BE too small for a horse – yes it can look like a pea on a drum, but as long as it is big enough for a rider it matters not.

What size reining saddle do I need?

Typically, the average woman should get a 16” to 16.5” seat. Men typically require a 16” to 17” seat. If you prefer a saddle that is built up a little in front to give a more ‘secure-feeling’ ride, make sure that the pocket is still in the middle. Next, take the time to look at the saddle horn and swells.

Will an Aussie saddle fit a mule?

In fitting the Australian saddle, view the saddle from the front of the mule. The padding should be in full contact with the mules back and the gullet must clear the mules withers.

Can you jump in an Australian saddle?

I love my Aussie saddle. I use mine for trail riding. You can jump in it, even with the poleys, it’s just not very comfortable and doesn’t put you in the optimal position.

Going to Sydney