If you want to supply power to your iPhone from the Australian power outlet you will need a Type I USB power adapter and a USB to Apple 30 pin cable (normally already supplied with your device by Apple). First you’ll need to insert the Type I USB power adapter in the Australian power outlet.
Do I need a voltage converter for my iPhone in Australia?
The iPhone power adapter is universal… you don’t need a voltage converter but you may need a plug adapter. See the small printing on the power adapter. This has everything you need to use all your Apple devices all over the world. You’re welcome.
Do I need a voltage converter for my iPhone?
No, iPhone’s charger works both on 120 volt and 220 volt. … A plug adaptor is all you need, the charger itself can run on any voltage between 100 and 240.
Do I need a voltage converter for Australia?
You cannot use your electric appliances in Australia without a voltage converter, because the standard voltage in Australia (230 V) is higher than in the United States of America (120 V).
Can I charge my iPhone with 240 volts?
Apple’s iPhone chargers work with voltage anywhere in the world., 110, 115, 120, 220, 230, 240 and whatever else you might find. … Your Apple power adapter is designed to accept any AC voltage between 110 and 230v, so you only need to do the plug fitting conversion.
What adapter do I need for Australia?
Mains voltage in Australia is 230V 50Hz. Travellers from most nations in Asia, Africa and Europe should have appliances that work on the same mains voltage as Australia – therefore you will not need a voltage converter. Notable exceptions to this are Japan, USA and Canada which uses 100/120V 50/60Hz.
Will 220 volts work in Australia?
Thankfully today most low-power devices like laptop and phone chargers power supplies will work on both 110 and 220 volts. … If the tag has a single voltage number (110 or 120 volts), you do; if you see a combined low/high number (120/240 volts or 100/240 volts) or digits of 200 or higher, you don’t.
What is difference between adapter and converter?
The big difference between an adapter and a converter is electricity. While the purpose of an adapter is to simply help the plugs on your electronics fit into (or more aptly, adapt to the shape of) foreign outlets, a converter’s job is to change the voltage found in an outlet to match that of your devices.
Can I plug my phone into a 220v outlet?
A dual voltage device can accept both 110-120V and 220-240V. Luckily, many travel gadgets are dual voltage, so you’ll only need a plug adapter, also called a travel adapter. Plug adapters are much smaller, lighter, and, thankfully, they’re also pretty cheap.
Will my iPhone charger work in Europe?
Yes, you can use the simple adapter. If you read the tiny fine print on the plug end you see “110-240V 50-60Hz” which means it will work on most common electrical systems around the world without a transformer.
Can I use US electrical appliances in Australia?
Electrical Power Specifications in Australia, New Zealand & Fiji. Voltage (230 Volts): … Step down transformers convert 220/240 volt electricity to 110/120 volts for American appliances. Some appliances will show on their “specifications” plate an “input” of 100V-240V which means it will not require a converter.
Are US and Australia plugs the same?
Take care: United States of America uses lower voltage than Australia. … You will need a step up voltage converter a device that can be plugged to 120 volts and it provides an outlet with 230 volts for your Australia’ device.
What happens if you plug 110V into 240v?
If you plug an 110V appliance in 220V outlet (same as 120v to 230v, 240v) you can only hope that some protection device disconnects the power to the appliance. … It is current that is your enemy, a piece wire that is warm at 110V (120v) will turn into a fuse at 220V (230v, 240v), all other things being equal.
Can I plug my iPhone into any USB port?
You can plug your device into any USB port and the device will charge just fine. I have an old phone adapter.
How much voltage is needed to charge an iPhone?
All iOS devices (iPhones, iPads, etc) charge at 5 volts. So, if all you need to know is voltage, then 5 volts is the official requirement for charging. However, the rate at which a device will charge is partly dependant on the rate at which the charge is flowing (known as current).
What is the voltage for iPhone?
Line voltage: 100 to 240 V. Output Voltage/Current: 9 VDC/2.2A.